Ball mill is widely used, ball mill grinding is the most widely used industries. As a large-scale mineral processing equipment suppliers, the production of the mill, 60% for the concentrator work, grinding is a broken process to continue, is the ore in the last one before the sorting process. The purpose of grinding is to make a useful component of ore to reach all or most of the isolated monomers. At the same time try to avoid the "excessive grinding" phenomenon. And to achieve the operational requirements of the particle size sorting, sorting operations for the effective recovery of ore create the conditions for a useful component.
Ads by Google
 
Ball Mill's use and presentation:
First, before starting to prepare:
1, check whether any hazardous locations.
2, check all lubrication points, lubricants oil level is appropriate, is insufficient to add.
3, check whether the ball inside the ball fill rate to meet the requirements.
4, check the mill body liner bolts, grinding head bolt and cylinder connecting bolts, etc. Are there loose and reliable fastening.
5, will be built into the hole tightly secured and reliable.
6, check the cylinder bolt hole and into the hole, etc. whether the phenomenon and to remove the powder leakage.
7, the first commissioning or long-term stop-start again after grinding should be the first to the ends of hollow-bearing poured a small amount of lubricating oil, and use of artificial disc mill a week, or "jog" spin week, confirmed that no anomaly.
8, and before and after the job contact was allowed before starting signal starting mill.

Second, starting order:
1, starting powder output device.
2, starting mill.
3, starting Feeder.

Third, stopping the sequence:
1, stop feeding machine.
2, stop ball. A long time to stop grinding balls and materials should be empty of blood.
3, conveyor continues to operate to the plane finished material discharged after parking.