Super indexing spacer
Features
1.The center through hole is big to be suitable for the large and long workpiece.
2.Hardened and ground 24 position master plate, can index the special angle of 15 with excellent accuracy.
3.CS-Type can be used with 2 pcs type 3-Jaw Chuck. Especially, it does similar work. as rotary table when it match with face plate.
4.Rapid indexing and easy operation. It’s a sharp equipment for mass-production.
5.Super Spacer index include 3 jaw chuck, Face plate dia. 10”, 250mm Masking Plates 2,3,4,6,8,12.
6.Simple index include 3-jaw chuck, Masking Plates 2,3,4,6,8,12
7.Used the key guide block, the center can be corrected quickly and accurately.
Specification
specification |
CS-8 |
CS-6 |
Center height mm |
150 |
130 |
Center diameter of the spindle mm |
Φ119.774 |
Φ80 |
divisions |
2、3、4、6、8、12、24 |
2、3、4、6、8、12、24 |
Graduated disc of spindle |
360° |
360° |
Locating diameter of the spindle mm |
Φ212 |
Φ170 |
Modules of worm and worm gear |
1.5 |
1.25 |
Transmission ratio of worm and worm gear |
0.104166667 |
0.104166667 |
Showed degree of worktable per revolution of worm |
4° |
4° |
Minimum value of vernier |
10" |
10" |
Width of the locating key mm |
16 |
16 |
Matched chuck |
K31210A |
K31167 |
24 divisions individual error |
25" |
25" |
Worm gear dividing error |
±60" |
±60" |
Net weight kg |
(62) 77 |
(40) 50 |
Gross weight |
73) 88 |
(50) 60 |
Case dimensions mm |
490×425×380 |
470×350×360 |